As backup cameras are located outside the car and near the road, they accumulate dirt and grime. Leaving it dirty reduces performance and adversely affects reversing. How to clean a backup camera lens to ensure optimal performance? Keep reading to find out.
Using a soft cloth and the recommended chemical from the manufacturer, wipe the backup camera lens clean. It is common and practiced to clean a camera lens this way. However, it is important to read the manufacturer’s maintenance guide before using any material on your lens.
Maintaining backup camera lenses has numerous benefits, which is why manufacturers recommend weekly cleaning. Depending on your location or commune, some lenses may require more maintenance than others.
Table of Contents
Why You Need To Clean Your Backup Camera Lens
For Clear Video Transmission
Rearview cameras mainly display clear, high-resolution videos of your vehicle’s rear. When the Camera is dirty or grimy, it displays blurry and distorted images, making it difficult to use.
To Save Life
In the United States, rearview cameras are mandatory because of a backup accident that killed a two-year-old boy. The most common victims of backup accidents are children and pets. Rearview cameras reduce the frequency of accidents, but dirty lenses can make it hard to see what’s behind you.
To Save Properties
Navigating through a full garage requires a clean camera lens. Without destroying anyone, you must carefully navigate piles of valuable properties.
It is easier to park and maneuver with a clean camera lens. You can drive through congested traffic and park in tight corners with clear, high-resolution video.
How To Clean Backup Camera Lens?
Cleaning your backup camera lens for maximum results and performance is as easy as following these instructions.
What Do You Need?
Having to replace backup cameras constantly can be a financial burden, even if they are not expensive. To keep the lens in good condition while you clean, you must take a few preventive measures. A UV filter should be applied to the lens of advanced backup cameras.
In this way, you can protect your lens from elements and scratches. Depending on the terrain and weather, too many scratches on the lens may result in blurry images, so you need to replace them frequently.
Blowing Away Dust
The lens of your backup Camera can be cleaned with a soft fabric and chemicals. Using a blower or other useful equipment, you can remove dust and dirt from the camera lens by blowing it away.
It is useful for motorists who drive on clean terrain and want to clean their lenses regularly. Depending on your schedule, you can blow away dust every morning or even twice a day. In any case, it is not required. When cleaning with a cloth, it’s important to blow away dust first, as you may scratch the lens.
Brush The Lens
Although a blower removes dust effectively, persistent particles can remain on the lens, especially around the edges. These hard-to-remove particles can be removed with a soft-bristled brush.
Brush gently, and if you feel anything, using your fingers will help you remove it. Refrain from brushing too hard, as it may damage the lens.
Apply Cleaning Solution
It’s time to clean your lenses thoroughly. There is a risk of damage if any slight error is made during this step. It would help if you cleaned your lens with a soft cloth, tissue, or paper. It is also important to consider the chemical.
Chemicals can damage the lens and remove the protective coating, causing further damage. Below are the recommended cleaning agents and materials. Apply 3-5 drops of the chemical and gently clean the lens line by line once you have secured the correct cleaning agents.
Don’t apply too many chemicals, which may also damage your skin. For best results, follow the instructions for the latter. Before using the lens again, let it dry.
Wipe With Microfiber
Last but not least, wipe the lens gently with microfiber after removing stubborn particles with a soft-bristled brush. Those who missed that step should review how to clean a lens without scratching it. After that, wipe the lens gently with microfiber.
Clean Other Components
In some rearview cameras, only the lens pops out, but in others, the entire body of the Camera is outside, therefore also exposed to dirt and grime. Grease may not cause as much damage as the lens, but removing moisture, dirt, dust, and grime will extend its lifespan and improve its efficiency. Microfiber, water, or a brush can be used depending on the material of the body. Take the device apart piece by piece to remove dirt if you can reassemble it.
How Frequent Should You Clean Your Backup Camera Lens
Depending on usage and terrain, clean your backup camera lens every week. Brushing it once a week will suffice if your commute is clean and the terrain is smooth. Nevertheless, rough and dirty terrain may require more frequent cleaning.
It is recommended that you wipe your lens every morning before you drive to work. After work, wipe it if you have time. Your monitor will let you know when it’s time to clean your backup Camera, as you can see spots on it when it’s time.
Why Is My Backup Camera Blurry?
There are several reasons why blur occurs. Nevertheless, some tried and tested methods for dealing with blurry backup cameras.
Clean The Camera
First and foremost, dirt, moisture, and grime are to blame. Having these on your camera lens can reduce transmission quality. Use microfiber to clean the lens. Use a microfiber to clean the lens thoroughly after applying a cleaning agent (chemical).
Consider buying a self-cleaning rearview camera if you’re always busy. While the Camera cleans itself, you’ll only need to apply Rain-X to the screen.
Repair Faulty Connections
Second, repair any damaged or broken cable running from the front of the car to the rear. Make sure the wires are not split or broken by tracing them carefully. Tape back the wires and join them properly. Make sure your fuse box is free of blown fuses as well. It is easy and cheap to replace.
Upgrade your backup Camera
Upgrade your rearview mirror here. In addition to being affordable, they offer a variety of useful features.
Frequently Asked Questions (FAQ)
Why should you clean the camera lens?
The condition of your camera lenses largely determines image quality. Clean lenses produce sharp and crisp photos. Additionally, they tend to last longer than dirty lenses for obvious reasons.
Does a dirty lens Effect a photo?
Dirty camera lenses are like looking through a dirty window; even the slightest dirt will affect your picture. I took this image with a water droplet on my lens, resulting in a blurry area right in the middle of the image.
What damaged camera lenses?
An interior element of a camera lens becomes infected with lens fungus when dust and moisture combine. In most cases, dust doesn’t cause a problem, but if it contains fungus spores combined with moisture, it can cause fungus growth.
How do I know if my camera sensor is dirty?
See if you can find any dark spots by zooming in on the image (rear camera LCD), scrolling left to right, and top to bottom. Your sensor is clean if you cannot see any. Dark spots on your sensor, such as those in the example above, indicate dust on the sensor.
To sum up, cleaning a backup camera lens is easy if you follow the manufacturer’s instructions. When cleaning the lens, use microfiber and the recommended cleaning agent instead of harsh chemicals. Remember to brush and dust the lens before cleaning it thoroughly.
You May Like To Read Also: