If you’re having trouble resetting your Blink camera after replacing the battery, here’s a guide on How To Reset Blink Camera After Replacing Battery. If your Blink camera is experiencing issues, like recorded videos or pictures not uploading, resetting the camera may help to solve the issue.
Resetting Your Blink Camera
Blink cameras can be reset by holding down the Sync Module’s button until its light turns red; this resets the camera’s system and requires reinstalling the Sync Module in the Blink app. Blink Mini cameras also have a reset button since they do not require a synchronization module to operate.
You can often get your Blink camera back online by power cycling your Internet router or Sync Module. It can save you a lot of time when troubleshooting your Blink system if you know when to reset it versus when to power cycle your router and module.
When Should I Reset My Blink Camera?
It is recommended to power cycle your camera or Sync Module before resorting to a reset if they are offline. You can try power cycling as a first step without reconfiguring your system. Try power cycling your Internet modem if your Blink camera system is offline. To do this, follow these steps:
- You need to unplug your Wi-Fi router and Internet modem.
- Give it a minute.
- Reconnect the modem.
- Connect the router as soon as the modem is back online.
Check the lights on the Sync Module to see if the Internet power cycle worked. One solid green light and one solid blue light should be present.
Try power cycling the module if this doesn’t work:
- The Sync Module power cable should be unplugged.
- Do not click until at least ten seconds have passed.
- Reconnect it.
- Allow the system to power back up for at least one minute. Observe the solid green and blue lights.
Resetting the Sync Module
Your problem may not be solved by power cycling. If that is the case, you will need to reset your Blink system by resetting the Sync Module.
Press and hold the reset button on the device’s side, next to the USB port, until the light turns red to reset the module. It may take 15-30 seconds to complete this process. When you see one solid green light and one flashing blue light, the reset was successful.
By resetting the Sync Module in this way, all connected cameras will go offline. The Blink app requires you to reinstall the Sync Module in order to use your cameras again.
In order to delete your Sync Module and reinstall it, follow these steps:
- Click on the Blink app.
- Click on “Delete Sync Module.”
- Serial numbers can be scanned or entered.
- Click “Delete.”
- Click on the + sign on the home screen.
- Choose “Blink wireless camera system.”
- Re-scan or enter the serial number of the module.
- Choose your Blink system.
- Click on “Discover Device.”
- Join by clicking “Join.”
- Click on “Done.”
Contact Blink customer service if resetting the Sync Module does not resolve your camera issue.
Resetting Blink Mini Cameras
A Sync Module is not required to operate the Blink Mini. It is necessary to reset the camera itself if you have a Blink Mini that operates independently. Cameras have a reset button at the bottom. To connect your camera to a Sync Module or connect it to the Internet, use the reset button. Just like the Sync Module, you can power cycle the Mini or delete and reinstall it in the Blink app.
Is there a reset button on the Blink camera?
On the bottom of the camera, there is a small reset button. Sync modules or the Internet must be connected to the camera before the reset button can be used. In the Blink app, you can also power cycle or delete and reinstall the Mini.
How do I factory reset my Blink Mini camera?
Your internet modem can be unplugged, waited a few minutes, then replugged. If your Sync Module or cameras are not working, this is usually enough to fix the problem.
Do you need a Sync Module for every blink camera?
Up to ten cameras can be connected to a single Sync Module. Adding more than ten cameras, or adding cameras at a different location, will require another Sync Module. All connected Blink devices can be managed from a single account using the Blink app.
How Long Does A Blink Sync Module Last?
With a Blink Sync Module 2, you can share 7200 seconds of free basic cloud storage with the XT2, XT, or Indoor (gen1) cameras. Even if other cameras on the same system save to Local Storage on the USB drive, this remains true.
Will Blink cameras work if the Sync Module is unplugged?
Your camera communicates with the Blink server, the Blink application, and the Sync Module to transmit commands. It is not possible to exchange data without an internet connection.
Why Won’t My Blink Camera Sync To The Module?
An error message stating “Unable to Connect to Sync Module” may occur if certain devices on your Wi-Fi network conflict with the setup process, such as Smart Thermostats. Monitoring devices for babies. Appliances such as microwaves, refrigerators, etc.
Does Blink Camera Connect To Wi-Fi Or Sync Module?
Images and notifications are sent through your local Wi-Fi network once the Sync Module receives information from it. In addition to the three bars of Wi-Fi signal strength, your camera should display three bars of Sync Module signal strength. Signal strength is reduced by obstacles and distance.
Replacing your Blink camera battery is a common occurrence for most homeowners. However, if the camera doesn’t work after replacing the new battery, try resetting it instead. Read this guide to know how to do it and also make sure you don’t tap on anything or touch any of the buttons while doing so.
In case you still face issues in restoring your Blink camera back to normal functionality after deleting its memory card, make sure that you restore the device using its backup files.
You May Like To Read Also: