How to Reset Hikvision Camera - Use Deferent Ways

Table of Contents

Resetting a Hikvision camera is a simple yet effective way to restore your camera’s settings to the factory defaults. This process can be done either by using the reset button on the back of the camera or by accessing the web interface. By following these steps, you can easily reset your Hikvision camera and get it back up and running in no time.

How to Reset Your Hikvision Camera Password

Restoring the default password for your IP camera can be a simple process.

First, you must connect the device to your local network and run SADP software to search for online devices. Once the Camera has been discovered, select it and click “Forget Password.”

A dialog will pop up requiring you to enter a security code.

After inputting the security code, hit “confirm” to restore the password. Keep in mind that this process will only work if you know the security code for the device.

You’ll need to contact the manufacturer or an authorized reseller for assistance if you don’t know the security code.

The Hikvision Cameras With Hard Reset Buttons

The Hikvision cameras are equipped with hard reset buttons, enabling the user to perform various tasks.

To hard reset a Hikvision camera, you should follow some steps

Locate the reset button on the Camera.
Use a paperclip or sharp object to press and hold the reset button for 10 seconds.
The Camera will restart, and all your settings will be erased.
Be sure to configure the Camera again after performing a hard reset.

Hard resetting will delete all your settings, so make sure you have a backup before you begin.

How to Reset Your Hikvision Camera Via a Web Browser

You can reset your Camera through a web browser by following the instructions below.

From any computer, go to the following address: https://www.hikvision.com/en/support/
Sign in with your username and password.
On the left navigation bar, select Device Management.
Select the category and click on the icon in front of the Camera (it will bring up a menu).

How to Reset Your Hikvision Camera Without a Computer

If you have no computer available, you can still reset your Camera.

From any phone, open the Hikvision app and select Settings.

On the left navigation bar, select Device Management.

Then, select the category and click on the icon on the front of the Camera (it will bring up a menu).

Please scroll down to Reset Camera and select it.

The Camera will reset, and you can set it up again.

How to Factory Reset Your Hikvision Camera

To factory reset your Hikvision Camera follow these steps:

First, go to https://www.hikvision.com/
Log in with your username and password.
Then, on the left navigation bar, select Device Management.
On the Device Management page, find the category for your Camera and click on the icon in front of the Camera (this will bring up a menu)
Please scroll down to Reset Camera and select it.

On the next page, you’ll be able to choose the language and region for your Camera. You can also reset the Camera’s date and time, erase all videos and photos taken on the Camera, and change the password for the Camera.

Once you’ve made all the changes you want, click on the button in front of the Camera to save those changes. And that’s it! Your Hikvision Camera has now been reset to its factory settings.

How to Restore Default Settings on Your Hikvision Camera

If you need to restore the default settings on your Hikvision Camera, it’s a simple process.

Start by going to the Maintenance menu, then choose Configuration.

From there, select Default and then click Restore.

This will restore all Camera settings except for the IP address.

If you want to erase all of the Camera’s settings and restore it to factory defaults, click Default instead.

Once you’ve selected, the process will complete quickly, and your Camera will be reset to its original state.

Frequently Asked How to Reset Hikvision Camera Questions:

How Do I Access The Microcomputer Within My Hikvision Camera?

To access the microcomputer within your Hikvision Camera, you will need to connect the Camera to a monitor or TV via an HDMI cable. Once the connection is established, you can see the microcomputer’s interface on the screen. To navigate the interface, you will use a mouse or a keyboard.

The commands for controlling the Camera are typically straightforward and self-explanatory. For more detailed instructions on how to operate your Camera, consult your Hikvision Camera’s manual.

How Do I Contact Hikvision Customer Support?

Hikvision customer support can be contacted through their website or by phone. Their website has a form that can be filled out and submitted, or you can use the live chat feature to speak to a customer support representative in real-time. You can also find helpful FAQs and manuals on the website.

If you prefer to talk to someone over the phone, Hikvision customer support can be reached at +86-10-57170660. Customer support hours are Monday-Friday, 9 am-6 pm local time. When calling, please have your product information ready so that the representative can assist you more quickly and effectively.

How Do I Change The Recording Settings On My Hikvision Camera?

To change the recording settings on your Hikvision Camera, log into the web interface and click on the “Record” tab.

From here, you can adjust your recordings’ resolution, frame rate, and bitrate.

You can also choose to record continuously or only when motion is detected. Once you have made your changes, click “Save” to apply them.

Please consult the Hikvision manual or contact customer support if you need further assistance.

What Are The Default Recording Settings For My Hikvision Camera?

The Default recording settings for Hikvision cameras are as follows:

The video recording compression format is H.264, the video recording frame rate is 25 frames per second, and the video bitrate is 2 Mbps.
The audio recording format is G.711, and the audio bitrate is 64 Kbps. The recording resolution is 1920×1080 (1080p).
The storage location is set to the local storage on the Camera. The file name format is Date_Time_CameraName. The file type is .h264.
If you want to change any of these settings, you can log into the Camera’s web interface and navigate to the “Record” tab.

From there, you can adjust the settings to meet your needs.

Conclusion

If you’re having trouble resetting your Hikvision Camera. In that case, this guide will walk you through our blog post on How to reset hikvision Camera so you can return to enjoying its many benefits.

Recommended Articles For You:

Author

Alex Parker

View all posts