Table of Contents
Installing a security camera is an enjoyable DYI process; running a security camera cable through walls is the most challenging part. Security cameras you install at the house would be located out of your home. Yet, you will have the DVR mounted inside the house.
This is wherever you will be required to understand how to run security camera wires through walls.
With the correct tools and proper guidelines, anybody can install them easily. Here is a quick procedure for running security camera wires through walls.
Tools used to Run Security Camera Wire through Walls
You have to know what tools are needed before looking at the steps. The tools that you need are
- Power plug.
- Screwdriver.
- Camera cables.
- Electric plastic box.
- Fish rod and bits.
- PVC conduit.
These are the standard tools expert installers use to run camera wires; you can select any tool you want to do the work correctly.
How do you Run Security Camera Wires through Walls Outside?
Outdoor security camera cabling is complex, so you must make a comprehensive plan to protect the cables from harsh weather elements. Here are the phases you can take to get the job done.
- Have a well-planned cable route. Ensure it is the easiest and shortest route toward burying the conduits.
- Use a cable guard, PVC, or metal conduits to protect the cables as you bury them to shield them from animals, humans, and weather components.
- Use weatherproof and waterproof outlets for external power toward Wi-Fi cameras.
- Drill a hole to run the security cables from the house to the external cameras. If possible, drill at the wall & not from your building’s floor.
- As per the National Electric Code or NEC, Bury the electrical wires or network cables shielded in PVC, metal conduits, or wire guard, 18 inches below the ground, for cables in PVC, or 6 inches, for lines in metal conduits.
- Use fish tape; pull the cable to fish the wires over the conduits.
How To Run Security Camera Wires Without Attic?
The attic is the most excellent place to terminate your wire. We could install the cameras and wire the walls if you do not have an attic. We could drill a hole in the wall and connect the IP camera wiring throughout the ceiling.
- We could also use the back side of our house to run wires. We can go over the outside throughout the soffit and our home’s walls.
- Drill the hole into the wall. Create a junction box in the walls while you don’t have access to the attic.
- With a junction box, we could wire the cables toward the walls.
- And with staples, we could staple the wires toward the wall. We can paint them above that so that they will not look strange.
- Another valuable means is to hide the camera with piping. Behindhand the soffit, you can do wiring; thus, we can hide the cables.
How to Run Security Camera Wires Inside Your House
Installing security cameras inside the house is more accessible than outside. It takes the following stages to get the job done.
- Before deciding on the wiring route, choose where to place the central surveillance hub, the NVR, or DVR. The location must be easy to access so you can do the wiring securely from any place in the building. Selecting a great central location will aid in avoiding wiring disasters.
- Switch off the power for safety.
- Drilling is the easiest way to run security camera cables through walls, soffits, and vinyl siding. Drill a hole wherever the outlet will be and use a leveled metal coat hanger to feel any obstacles. The hole must be larger than the maximum cables you will ever run.
- Use a PoE injector if the camera is far from the NVR/router.
- Attach the cables with fish tape. Use a security camera wire protection cover or conduit to shield the lines and run the wires to the central surveillance hub.
How to Hide Security Wires inside your Home
If you do not wish to ruin your home’s decoration, try these quick, easy steps to hide security wires.
- When you drill holes for your wires to pass over, you can easily hide them using wire guards. They are more artistically pleasing to the eyes instead of the cables themselves.
- Loose wires are very unappealing. Painting them is a worthy choice, or use staple cables, run them into corners & paint them afterward.
- Run the Home security wiring in your attic – the most excellent way to hide wires.
- Another great alternative is to let your run cables from PVC pipes or plastic pipes; this allows them to be concealed entirely and protects them from external harm, rats, and dust.
How to hide security camera wires outside
If you like wired security cameras over wireless security cameras, you have an extra burden to carry: the tangled-up cables that can decay your house’s vibe.
- The most excellent way to hide these irritating wires is to bury them. Here are some guidelines on how to hide security camera wires from plain view:
- Make the wiring path for your IP cameras as small as possible.
- Make the pipes to be used. You could use PVC or metal conduit pipes.
- Mark the points where you will drill holes.
- Bury the pipe. PVC pipe must be buried at least 18 inches below, whereas metal pipes require 6 inches.
- Run the security camera cables throughout the pipes. Use fish tape for pulling wires.
- If you do not wish to go through all this hassle, you can install outdoor wireless security cameras instead.
Faq
How long can you run the security camera cable?
Technically regular POE IP security cameras have a maximum limitation of 300 feet of the network cable to get a signal using pure copper wire. However, assessing a max of 250 feet is always safer since the type of cable used cannot always be guaranteed pure copper.
What is the best way to run security camera wires?
Drilling is undoubtedly one of the easiest and best ways to run security camera wires through walls. If you run Cat 5 or Cat 6 Ethernet cable for your camera, you could drill a hole to run the Ethernet cable from the camera to your router or NVR.
Which wire is best for a CCTV camera?
RG59 cables are a specific kind of coaxial cable that is usually used for CCTV applications. RG59 cables have greater bandwidth than coaxial cables, making them perfect for transmitting high-quality video signals.
Which CCTV wire is best for long distances?
RG6 wire has thicker insulation and braiding. Therefore, it could be used to transmit signals toward a much longer distance as compared to RG59. RG59 is better suited for workplaces and interiors, while RG6 is better suited for comprehensive surveillance of buildings or parts of cities.
Conclusion
Wiring the security camera is a significant process in installing the security camera. From the above direction, the wiring will be easy to install. Ensure to use wire protection to prevent them from any disconnections. Hiding the wires is not only for the attractiveness of the walls but also for safety purposes.
If the cables are visible, they could easily cut them and indulge in theft or unlawful activities. We can easily wire the lines throughout the walls with the perfect tools. Once installed, security cameras could protect your family and your office. Hope this is useful.
You May Like To Read Also:
Leave a Reply
You must be logged in to post a comment.